September 2016
Part No. 1272852
GTH-5519
2-3
Section 2 • Specifications
Hydraulic Speci
fi
cations
Hydraulic Oil Speci
fi
cation
Hydraulic oil type
Viscosity grade
Viscosity index
Chevron Rando HD equivalent
Multi-viscosity
200
Cleanliness level,
minimum
15/13
Water content,
maximum
200 ppm
Chevron Rando HD oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which
are designed to give maximum protection to
hydraulic systems, have the ability to perform over
a wide temperature range, and the viscosity index
should exceed 140. They should provide excellent
antiwear, oxidation, corrosion inhibition, seal
conditioning, and foam and aeration suppression
properties.
Optional
fl
uids
Biodegradable
Petro Canada Environ MV46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
Fire resistant
UCON Hydroluble HP-5046
Quintolubric 822
Mineral based
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Chevron Aviation A
Eni Arnica 32
Continued use of Chevron Aviation
A hydraulic fluid when ambient
temperatures
are
consistently
above 32°F / 0°C may result in
component
damage.
Note: Use Chevron Aviation A hydraulic fluid when
ambient temperatures are consistently below
0°F / -17°C.
Note: Use Shell Tellus T46 hydraulic oil when oil
temperatures consistently exceed 205°F / 96°C.
Genie specifications require additional equipment
and special installation instructions for the
approved optional fluids. Consult the Genie
Service Department before use.
Continuous improvement of our products
is a Genie policy. Product speci
fi
cations are
subject to change without notice.
NOTICE
SPECIFICATIONS
