2-6
GTH-5519
Part No. 1272852
September 2016
Section 2 • Specifications
Deutz TD 2.9 L4 Engine
Displacement
2925 cm
3
Number of cylinders
4
Bore and stroke
3.62 x 4.33 inches
92 x 110 mm
Horsepower
74 HP @ 2600 rpm
55.4 kW @ 2200 rpm
Peak Torque
192 lb-ft @ 1800 rpm
260 Nm @ 1800 rpm
Firing order
1 - 3 - 4 - 2
Compression ratio
17,4:1
Governor
Electronic
Low idle
Frequency
1000 rpm
100 Hz
High idle
Frequency
2700 rpm
270 Hz
Lubrication system
Minimum oil pressure
17.4 psi
1,2 bar
Maximum oil capacity
(including filter)
2.11 gallons
8 liters
Oil viscosity requirements
Units ship with 15W-40 Shell Rimula R4 L.
Extreme operating temperatures may require the use
of alternative engine oils. For oil requirements, refer
to the Engine Operation and Maintenance Manual on
your machine.
Fuel requirements
For fuel requirements, refer to the engine Operation
Manual on your machine.
Fuel injection pressure
1595 psi
110 bar
Engine coolant
Capacity
3.3 gallons
12,5 liters
Type
Extended Life
Alternator
Output
95 A, 12V DC
Starter Motor
Nominal power
3.2 kW
Nominal current
267 A
Cranking speed
130 - 200 rpm
Glow Plugs
Initial load (0-10 sec)
40 amps
Continuous load (>10 sec)
15 amps
Battery
Type
12V DC
Group
G28
Quantity
1
Cold cranking ampere @ 0°F
720 A
Nominal capacity
100 Ah
Continuous improvement of our products
is a Genie policy. Product speci
fi
cations are
subject to change without notice.
SPECIFICATIONS
