Document 57.0005.8200 - 12/2005
Handler with telescopic boom
GTH-6622
Page
B-6
SAFETY
•
Except for maintenance purposes, do not remove
safety devices, shields, protection cases, etc.
Should their removal be necessary, stop the engine,
remove them with the greatest care and always
remember to refit them before starting the engine
and using the machine again.
•
Before any maintenance or repair work, stop the
engine and disconnect the batteries.
•
Do not lubricate, clean or adjust moving parts.
•
Do not carry out operations manually when specific
tools are provided for this purpose.
•
Absolutely avoid to use tools in bad conditions or
in an improper way i.e. pliers instead of adjustable
wrenches, etc.
•
Before carrying out operations on hydraulic lines
under pressure or disconnecting hydraulic
components, ensure the relevant line has been
previously depressurised and does not contain any
hot fluid.
DANGER
Any intervention on the hydraulic circuit must be
carried out by authorised personnel.
The hydraulic circuit of this machine is fitted with
pressure accumulators. You and others could be
seriously injured if accumulators are not completely
depressurised.
For this purpose, shut the engine down and step
on the brake pedal 8÷10 times.
•
Neither smoke nor use open flames in areas subject
to fire dangers and in presence of fuel, oil or
batteries.
