Document 57.0005.8200 - 12/2005
Handler with telescopic boom
GTH-6622
Page
C-3
OPERATING INSTRUCTIONS
C-2 ENTERING THE MACHINE
■
C-2.1
ENTERING THE CAB
(ONLY WITH CABIN CLOSED OR
GLASS KIT INSTALLED)
CAUTION
Always make sure that your hands and shoe soles
are clean and dry before getting into the driving
cab. Always face the machine when entering and
leaving it and hold to the suitable handles.
The handler cab is equipped with an access door on
the left-hand side.
Door opening from outside:
•
Insert the key and release lock
1
.
•
Press the pushbutton and open the door.
Door closing from inside:
•
Pull the door with force: it locks automatically.
Door opening from inside:
•
Lift lever
2
and release the lock to open the door
completely.
•
Rotate handle
3
to open the upper section of the
door and lock it against the special catch.
To unlock the door latched in open position:
•
Press button
4
to unlock the door from the catch,
close and latch the door to the lower section using
handle
3
.
CAUTION
The upper section of the door must be secured to
the rear part of the driving cab or latched to the
lower section of the same door.
