11
Jump Starting Procedure
Fig. 1
Vehicle Battery Power
before engine start
Example
V: .
> >
* *
Fig. 3
Or Chassis
Ground
Fig. 2
V: .
> >
* *
Vehicle Battery Power
after engine start
Fig. 4
RED
(POS +)
BLACK
(NEG -)
9. Once vehicle has started, press POWER button on the side of
unit to turn unit OFF.
10. Remove BLACK NEGATIVE (-) jump starter clamp from vehicle
battery post or chassis ground.
11. Remove RED POSITIVE (+) jump starter clamp from vehicle
battery post.
• Recharge Genie ReliaVolt™ as soon as possible to keep ready.
• Store Genie ReliaVolt™ in its original case along with these
instructions.
