background image

2

Important Safety Information

WARNING

RISK OF ELECTRIC SHOCK OR FIRE

• 

Read the entire manual before using this product. 

• 

To reduce the risk of injury, close supervision is necessary 

when the product is used near children.

• 

Do not put fingers or hands into the product.

• 

Use of an attachment not recommended or sold by The 

Genie Company may result in a risk of fire, electric shock, 

or injury to persons.

• 

To reduce the risk of damage to the electric plug or cord, 

pull the plug rather than the cord when disconnecting the 

unit.

• 

Do not use a battery pack or appliance that is damaged 

or modified.  Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion or risk 

of injury. 

• 

Do not operate the power pack with a damaged cord or 

plug, or a damaged output cable. 

• 

Do not disassemble the power pack, take it to a qualified 

service person when service or repair is required.  

Incorrect reassembly may result in a risk of fire or electric 

shock.

• 

To reduce the risk of electric shock, unplug the power 

pack from the outlet before attempting any instructed 

servicing.

• 

Do not expose the unit to rain or snow. Do not expose the 

unit to excessive heat or fire.

SAVE THESE INSTRUCTIONS

!

Summary of Contents for ReliaVolt GPCD-R

















Reviews: