background image

3

Important Safety Instructions

WARNING

RISK OF EXPLOSIVE GASES

• 

WORKING IN VICINITY OF A LEAD ACID BATTERY IS 

DANGEROUS.  BATTERIES GENERATE EXPLOSIVE GASES 

DURING NORMAL BATTERY OPERATION.  FOR THIS REASON, 

IT IS OF THE UTMOST IMPORTANCE THAT YOU FOLLOW THE 

INSTRUCTIONS EACH TIME YOU USE THE POWER PACK.

• 

To reduce risk of battery explosion, follow these instructions 

and those published by battery manufacturer and 

manufacturer of any equipment you intend to use in 

vicinity of the battery.  Review cautionary marking on these 

products and on engine.

• 

Do not sit unit on flammable materials such as carpeting, 

upholstery, paper, cardboard, etc…

• 

Do not jumpstart a vehicle while charging the internal 

battery. 

• 

Never place the unit directly above the battery being 

jumped.

SAVE THESE INSTRUCTIONS

!

CAUTION

WORK AREA SAFETY

• 

Keep work area clean and well lit. Cluttered or dark areas invite 

accidents.

• 

Do not operate Genie ReliaVolt™ in explosive atmospheres, 

such as in the presence of flammable liquids, gases or dust. The 

Genie ReliaVolt™ can create sparks which may ignite the dust 

or fumes.

• 

Keep children and bystanders away while operating the Genie 

ReliaVolt™. 

• 

Store idle equipment. Always lock up tools and keep out of 

reach of children.

!

Summary of Contents for ReliaVolt GPCD-R

















Reviews: