background image

4

Important Safety Instructions

WARNING

PERSONAL SAFETY

• 

Consider having someone close enough by to come to 

your aid when you work near a lead-acid battery.

• 

Have plenty of fresh water and soap nearby in case 

battery acid contacts skin, clothing, or eyes.

• 

Wear complete eye protection and clothing protection.  

Avoid touching eyes while working near battery.

• 

If battery acid contacts skin or clothing, wash immediately 

with soap and water.  If acid enters eye, immediately 

flood eye with running cold water for at least 10 minutes 

and get medical attention immediately.  If battery acid 

is ingested, do not induce vomiting and seek medical 

attention immediately.

• 

NEVER smoke or allow a spark or flame in vicinity of 

battery or engine.

• 

Be extra cautious to reduce risk of dropping a metal tool 

onto battery.  It might spark or short-circuit battery or 

other electrical part that may cause explosion.

• 

Remove personal metal items such as rings, bracelets, 

necklaces, and watches when working with lead-acid 

battery.  A lead-acid battery can produce a short-circuit 

current high enough to weld a ring or the like to metal, 

causing a severe burn.

• 

Do not permit internal battery of the unit to freeze. Never 

charge a frozen battery.

SAVE THESE INSTRUCTIONS

!

Summary of Contents for ReliaVolt GPCD-R

















Reviews: