Part No. 62756
Genie S-120 & Genie S-125
19
Operator's Manual
First Edition · Fourth Printing
52 Push the steer
mode select
button for
coordinated steer.
53 Press down the foot switch.
54 Slowly move the drive/steer control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker switch in
the direction indicated by the blue traingle..
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis. The circle-end wheels should turn
in the direction that the yellow triangles point on
the drive chassis.
Test Drive and Braking
55 Press down the foot switch.
56 Slowly move the drive/steer control handle in the
direction indicated by the blue arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the blue arrow points on the drive
chassis, then come to an abrupt stop.
57 Slowly move the drive/steer control handle in the
direction indicated by the yellow arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the yellow arrow points on the
drive chassis, then come to an abrupt stop.
Note: The brakes must be able to hold the machine
on any slope it is able to climb.
Blue
Yellow
Test the Drive Enable System
58 Press down the foot switch and lower the boom
to the stowed position.
59 Rotate the turntable until the boom moves past
one of the circle-end tires.
Result: The drive enable
indicator light should
come on while the boom
is anywhere in the range
shown.
60 Move the drive/steer control handle off center.
Result: No drive function should operate.
61 Push the drive enable button and slowly move
the drive/steer control handle off center.
Result: The drive function should operate.
Note: When the drive enable system is in use, the
machine may drive in the opposite direction that the
drive and steer control handle is moved.
Use the color-coded direction
arrows on the platform
controls and the drive
chassis to identify the
direction of travel.
If the drive/steer control
handle is not moved within
two seconds of pushing the
drive enable button, the drive
function will not operate.
FUNCTION TESTS
