Part No. 139378
Z-30/20N • Z-30/20N RJ • Z-34/22 • Z-34/22N
2 - 3
Section 2 • Specifications
June 2011
REV C
Hydraulic Oil Specifications
Hydraulic Oil Specifications
Hydraulic oil type
Chevron Rando HD equivalent
Viscosity grade
Multi-viscosity
Viscosity index
200
Cleanliness level, minimum
15/13
Water content, maximum
200 ppm
Chevron Rando HD oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable
Petro Canada Environ MV46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
Fire resistant
UCON Hydrolube HP-5046
Quintolubric 822
Mineral based
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Continued use of Chevron
Aviation A hydraulic fluid when
ambient temperatures are
consistently above 32°F / 0°C may
result in component damage.
Note: Use Chevron Aviation A hydraulic fluid when
ambient temperatures are consistently below
0°F / -18°C.
Note: Use Shell Tellus T46 hydraulic oil when oil
temperatures consistently exceed 205°F / 96°C.
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Industries Service Department before use.
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
SPECIFICATIONS
Hydraulic Component
Specifications
Function pump
Type:
Fixed displacement gear pump
Displacement
0.183 cu in
3 cc
Flow rate @
2.1 gpm
2800 psi / 172 bar
7.9 L/min
Hydraulic tank
10 micron with
return filter
25 psi / 1.7 bar bypass
Function manifold
System relief valve pressure,
2800 psi
Z-30/20N and Z-30/20N RJ
193 bar
System relief valve pressure,
3200 psi
Z-34/22 and Z-34/22N
221 bar
Primary boom down relief pressure
1600 psi
110 bar
Secondary boom down relief pressure
1600 psi
110 bar
Primary boom extend relief pressure
1800 psi
Models with rotating jib
124 bar
Turntable rotate relief pressure
1100 psi
76 bar
Auxiliary pump
Type:
Fixed displacement gear pump
Displacement
0.3 gpm
1.14 L/min
Summary of Contents for Z-30/20N
