Easy Pen pro USB
User Interface Specifications
Page: 8
6.2 Basic Folder
˙
Changing the Tablet Orientation
Orientation allows you to rotate the Genius Tablet 90 degrees. Landscape is the
normal operating position (with the tablet's interface cables exiting the top of the
tablet). Selecting Portrait allows you to rotate the tablet 90 degrees clockwise from
the normal operating position (so the tablet's interface cables would be exiting from
the right hand side of the tablet). Try changing to portrait orientation if you prefer
using your tablet in a vertical orientation, like a typical sketch pad.
˙
Double-Click Test
In the Double-Click Test Box, you can set the widest and highest distance between the
two points of double click and you can set the speed of double click by dragging the
pointer on the slider bar or clicking on the slider bar. Then test the speed in the
"Smiling" area.
˙
Tracking Mode
The Tracking Mode function allows you to switch how the Genius Tablet
moves the screen cursor.
The Absolute tracking mode is the normal (default) tablet mode. In absolute mode the
screen is directly mapped to the tablet's active area. In this mode, the lower left
corner of the tablet's active area corresponds to the lower left corner of the screen, the
upper right corner on the tablet corresponds to the upper right corner of the screen,
etc. When you place a pointing device on the tablet, the screen cursor would jump to
the location on the screen that directly corresponds to the position on the tablet. You'll
notice that you don't have to "row" the cursor (e.g., pick up and move over and move
again) like you often have to do with a conventional mouse.
On the other hand, in Relative tracking mode you move the screen cursor just like you
would with a mouse. In relative mode it's possible to find yourself with the screen
cursor at one side of the screen, while your pointing device is at the opposite side of
the tablet. In that case, you would have to pick up and move your pointing device just
like you would do with a mouse. You can set the Relative Resolution in this area by
clicking the bar. The resolution means the number of pixel in an inch. The resolution
is higher on the right side than on the left side.
