1) Suck the point of weld of the
Resonator by Tin-Sucker.
2)
Remove the defective Minis tick
VR by Tweezers
2. Replace
1) Insert the same spec, complete
Minis tick on the correct hole
3. Solder
1) Solder the Minis tick VR.
2) Check all points of solder is o
4. Replace
1) Put a right mini-stick hat to the
minis ticks VR and make sure
that it position matches the VR.
S
ervice Guide
Attention:
When remove and add tin for mini-stick, for
fear short circuit, should make sure that don’t
put tin onto other
Compenent or electro
circuit.
11
------------------------------------------------------
KYE SYSTEMS CORP.
