9
S
ervice Guide
4.2 How to Replace the Motor
Procedure
Graphics
1. Remove
1) Dividually solder the motor line.
2) Remove the defective Motor by
Tweezers
2. Replace
1) Change a all right Motor
2) Solder the cord with the new
Motor
3. Assemble
1) Put the new Motor into the seat
2)
Check all points of solder is ok
Attention:
When remove and tin for motor,
For fear short circuit, should make
Sure that don’t put tin onto the Other
Component or electro circuit.
Attention:
1.Big and small motor can’t be installed
wrong.
2.Positive and negative pole electrical
Source line can’t be soldered in reverse.
------------------------------------------------------
KYE SYSTEMS CORP.
