English
7. How to record
After the car is turned on, the DVR will auto power on and start recording.
8. Playback
1. Press the Playback key ( ) to enter playback mode.
2. Select file types you want by the Up (
▲
) or Down (
▼
) keys.
3. Press OK key to confirm the video clip.
4. Use the Up (
▲
) or Down (
▼
) keys to shift the files.
5. Press the ( ) key to start playing.
9. Lock files in video reserved space
There are two ways to save the current video clip as a read-only file to prevent it from being overwritten
or deleted.
•
Manual Lock:
Press Lock File key during recording to lock the current file.
•
Bump Auto Lock /G-sensor
1. When any significant bump occurs, the file will activate the auto lock system.
2. A “Beep” sound will occur when any bump happens, the message “Lock File” will be shown on the
screen.
3. This DVR system can only save up to 10 locked files.
4. This message is shown, “Reserved space is full” on the screen when 10 locked files exist. The
DVR is still recording while the message is shown.
