ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
33
d. Press the valet switch the number of times of the selected function.
* The siren will sound every time the valet switch is pressed.
e. Press the
button
in the remote control of the selected option.
* If the
button 1
is pressed, the siren will chirp once (1); if the
button 2
is pressed, it
will chirp twice (2), and three chirps if
button 3
is pressed.
f. To exit the programming mode, turn the ignition key to OFF position.
* The siren will sound a (1) long beep.
PROGRAMMING TABLE
Times the
Valet
switch is
pressed
FUNCTION
Press button 1
Press
button 2
Press
button 3
1
Lock closure with automatic arm
YES
NO
2
Door’s Signal Activation Delay
WITHOUT
DELAY
Delay of 30
seconds
Delay of 60
seconds
3
Anti-hijacking by transmitter
YES
NO
4
Lock Doors with Ignition
YES
NO
5
Unlock Doors with Ignition
YES
NO
6
OUTPUTS FOR CHANNEL 3
Second Pulse to
Unlock Doors
CHANNEL 3
HORN
OUTPUT
(
-)
7
Anti-hijacking Warning
*Indicates the beginning of the
sequence
YES
NO
8
ARMED and DISARMED Notices
YES
NO
9
Reminder to arm the alarm.
*Only in Manual Arming
YES
NO
10
Opened Door Warning
YES
NO
11
Channel 2
Electric Trunk
Dome Light
30 second
Electric
window
lifter
12
Anti-hijacking by Door
Close Door
Opend Door
13
FABRIC RESET
SI
14
Witnessed Anti-carjack
(Additional Transmitter)
OFF
ON
15
Programmed controls identifier
(P.C.I.)
ON
OFF
