BLIZZARD 500-900 C
7
532103 - Rev.B
••••••
•••
••••••
•••
••••
••••
••••
MM/YY
PROG
••••
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
1
Tr
ansla
tion of the original instruc
tions
ENGLISH
Tr
ansla
tion of the original instruc
tions
ENGLISH
3.7 TECHNICAL CHARACTERISTICS
The GENIUS BLIZZARD 500 C and BLIZZARD 900 C series gear motors
are equipped with an electronic board that controls their automatic
operation (§ 6). The travel of the gate is determined by two magnetic
limit switches. Movement cannot be reversed: To operate the gate
manually, follow the instructions in § 5.5. The board may be equipped
with optional accessories:
-
obstacle recognition encoder (optional accessory in some mo-
dels);
-
GENIUS 5-pin radio receiver.
3.4 EMERGENCY USE
3.6 PRODUCT IDENTIFICATION
5
Technical Data
BLIZZARD 500 C
BLIZZARD 900 C
Supply voltage
230 V~ (+6%…-10%) 50 Hz 115 V~ (+6%…-10%) 60 Hz 230 V~ (+6%…-10%) 50 Hz 115 V~ (+6%…-10%) 60 Hz
Electric motor
Asynchronous single phase
Asynchronous single phase
Asynchronous single phase
Asynchronous single phase
Start-up capacitor
10 μF
40 μF
12.5 μF
50 μF
Max power
360 W
350 W
540 W
610 W
Thermal protection
140 °C (automatic rearming)
140 °C (automatic rearming)
140 °C (automatic rearming)
140 °C (automatic rearming)
Max thrust force
390 N
250 N
590 N
540 N
Starting thrust force
300 N
220 N
410 N
380 N
Pinion
Z16 Module 4
Z16 Module 4
Z16 Module 4
Z16 Module 4
Max sliding gate section length
15 m
15 m
15 m
15 m
Max. sliding gate section weight*
500 kg
500 kg
900 kg
900 kg
Sliding gate section speed
12 m/min
14 m/min
12 m/min
14 m/min
Ambient operating temperature
-20 °C - +55 °C
-20 °C - +55 °C
-20 °C - +55 °C
-20 °C - +55 °C
Type of use
Residential/Condominium
Residential/Condominium
Residential/Condominium
Residential/Condominium
Continuous use time (ROT)**
22 min
37 min
23 min
23 min
Ingress Protection
IP44
IP44
IP44
IP44
Dimensions (LxDxH)
297x170x256
297x170x256
297x170x256
297x170x256
Gear motor weight
9.2 kg
9.2 kg
10 kg
10 kg
Electronic board
SPRINT 382
SPRINT 383
SPRINT 382
SPRINT 383
* In the case of a cantilever gate, the maximum weight of the sliding gate section is reduced by 30%
** 20°C,
FO
=
20
(
§ 7.4
).
3.5 PRODUCT WARNINGS
Risk of fingers and hands being trapped between the rack, pinion and
casing (
2
).
In any malfunction, emergency or fault, disconnect the power sup-
ply of the automation. If the conditions allow the leaf to be safely
moved manually, use the MANUAL OPERATION; otherwise, keep the
automation out of service until it is restored/repaired.
In case of a fault, the automation must be restored/repaired must
only be carried out by the INSTALLER/MAINTENANCE TECHNICIAN.
IDENTIFICATION NUMBER
Month/year of prod
progressive number for the
month of production
E.g.:
0115 0001
Product name
Sales code
https://smartel.ua
