Status Indicator
The green LED indicator (located between the Scan and Custom buttons)
indicates the status of the scanner, as described below:
Light
Status
On
The scanner is connected with the computer, ready to scan images.
Flashing The scanner is busy scanning.
Off
The scanner is off, either because of disconnection with the
computer, or because the computer being turned off.
Scanner Connection
The first step to take when troubleshooting connection problems with your
scanner is to check all physical connections. The Smart Touch icon
, located on the
Windows system tray, indicates if the scanner software is properly launched and the
scanner and computer are communicating with each other.
Appearance
Status
The Smart Touch program has been successfully launched and
the scanner is connected with the computer, ready to scan
images.
The scanner is not connected with the computer.
No Display
You have chosen to terminate the Smart Touch program, no
matter the scanner is connected or disconnected with the
computer.
If the Windows system starts and detects the scanner unconnected, the following
message will appear to remind you:
Genius Scanner
13