ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
35
Genius Car Alarms
www.alarmasgenius.com
13
Channel 3 has two ( 2) type of signal ( pulse , pulse 30 seconds when arming)
A. Pulse: Press for 3 seconds and release the buttons 3 and 4 simultaneous remote control Genius
, and get a pulse .
B. Alza Electric glass. When arming the alarm system sends a pulse of 30 seconds which it can be
used to activate an optional module electric glass hike.
Function 12 / Output for intermittent horn.
Horn intermittent function can be programmed with two different functions but only one
of them can be chosen:
A. Horn Flashing. Flashing sounded the horn of the vehicle when the system alarm is triggered by
attempted theft and give 1 beep when arming the alarm system and 2 sounds to disarm the alarm
system, work in conjunction with the functions of the siren output (independent).
B. Dome Light , internal lights of the vehicle to disarm the alarm system and light flashing at the
siren either panic or attempted theft. Short Current, When arming the alarm system maintains a
constant pulse which can it is used for a second short current or activate additional sensors.
Function 13 / Acoustic Notice to activate the Anti hijack.
Upon activation of the anti - hijack by any of its 4 methods, the siren will sound 1 beep sound.
Function 14 / Engine failure during the phase of anti hijack.
When the process of the function of the anti - assault reaches 45 seconds, the power failure is
activated intermittently, generating an engine failure and preventing the vehicle engine is turned off
abruptly after 15 seconds of engine failure the constant power failure triggered, shutting off the
engine completely and preventing it can be restarted.
Function 15 / Close insurance with Automatic Re-arming.
With function 5 ON, to disable the alarm system and no door is opened or the ignition key is not
passed to ON, within 90 seconds the alarm system is armed in automatic form and locks are
closed.
Function 16 / Anti hijack by presence (Aditional Transmisor)
This function is used to immobilize the vehicle in case of emergency, simply opening one of the
doors and moving the transmitter presence of about 15 meters from the vehicle, the engine is
running. If you have the transmitter present within the vehicle, the alarm will recognize the signal
and anti - hijack came into passive mode.
Function 17 / ID programmed controls (I.C.P.)
Every time you put the key in the position (ON) the LED will light up intermittently within 10
seconds to indicate the number of remote controls that were scheduled.
1. Flasher / pause = 1 programmed control
2. Flasher / paus = 2 programmed control
3. Flasher / pause = 3 programmed control
4. Flasher / pause = 4 programmed control
Función 18 / Reconocedor de conductor
To disarm the alarm with the remote control the vehicle engine remains locked and to unlock
perform the following steps :
a.
Press the open padlock on the remote control to disarm the alarm.
b.
Turn the key in the position (ON).
c.
Enter the PIN code by pressing the valet and the power outage will be unlocked.
If the PIN code is 1, the system can be unlocked as soon as you press the valet.
If anti - hijack (ignition) is activated to move the vehicle key to position ON press once (1) button
valet and anti - mugging and function driver recognition will be canceled at the same time.
