ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
30
2
.
Valet by Reset Switch.
a. When the ignition key is in ON position, keep pressing reset switch until the siren
chirp 5 times.
b. The LED will light solid confirming that the system is in Valet mode.
c. To exit Valet mode, apply the previous mentioned procedure.
* The LED will turn off.
DOORS LOCK WITH IGNITION
The overall alarm system offers us a comfortable and secure operation, and this function is
one of them.
a. After the engine ignition is on, the doors will be locked 2 seconds later.
b. Once the engine is turned off, the doors will be unlocked immediately.
DOOR
LOCKS’
CONTROL
WITH THE TRANSMITTER
WHILE DRIVING
While driving, if we press
button 1,
the doors will be locked; and if we press
button 2
, the
doors will be unlocked.
FUNCTIONS’
SELECTION
- JUMPERS
Important: All the Jumper’s selections have to be determined before installation.
JUMPER
MODE
DEFAULT FABRIC
CONFIGURATION
MODE
VARIANTS
J1: AUTOMATIC ARMING /
MANUAL ARMING
AUTOMATIC ARMING
MANUAL ARMING
J2: DOOR LOCKS’ TIME
0.5 SECONDS
DOUBLE PULSE
J3: DOORS’ POLARITY
(+ O -)
DOORS’ INPUT (-)
DOOR’S INPUT (+)
J4: ANTI-HIJACKING BY
IGNITION
ACTIVATED
(ON)
DEACTIVATED
(OFF)
INSTRUCTIONS
* LED’S
CONDITIONS
a. Armed Alarm: The LED will flash slowly (once every second)
b. Automatic Arming and Re-arming: The LED will flash rapidly.
c. Valet Mode: LED will light solid.
*
TRIGGER DIAGNOSIS
–
LED
Disarming the alarm after it was triggered will make the LED to flash, indicating us the
zone that triggered the alarm.
Triggered by Ignition ---------------------------The LED will flash once.
Triggered by Opened Door ---------------------The LED will flash 3 times.
Triggered by Shock Sensor----------------------The LED will flash 4 times.
FUNCTIONS PROGRAMMING
a. Turn the ignition key to ON position.
b. Within 10 seconds, press the valet switch
5
times.
