ENGLISH
Genius Advanced Technologies
www.geniuscaralarm.com
13
Note: This command usually be used to check the tracker current sta-
tus & configuration, if the tracker can not work well, this command can
check what the problem is.
10. Re-power On & Reset Tracker
Send SMS “RESET*123456” to tracker, “RESET” is a command,
“123456” is password. The tracker will send back information “Reset
Tracker and cancel all alarm setting”, if the password is not right, the
operation is fault, the tracker will send back information “Wrong Pass-
word”.
The tracker will power off and then power on automatically, this will
take a few minutes, and then cancel all the alarm setting in the track-
er, including shock alarm, turn off car engine etc.
11. Back to factory configuration
Send SMS “FACTORY*123456” to tracker, “FACTORY” is the fixed
command, “123456” is password. The tracker will send back informa-
tion “Set factory setting OK”, if the password is not right, the operation
is fault, the tracker will send back information “Wrong Password”.
After this, The tracker will cancel all the alarm setting in the tracker,
including shock alarm, move alarm, geo-fence alarm, over speed
alarm, delete all the authorized phone number, delete the APN and
GPRS user name and password,change the tracker password to
123456, reset the IP address, reset the system working mode and
the interval time, and so on.
1> If forgot the password, you can not reset by the SMS command.
2> After back to default set, if the IP/APN/GPRS name & password
are changed manually, you need set these again by sending SMS.
12. Cancel All Alarm Setting
Send SMS “CANCELALARM*123456” to tracker, “CANCELALARM”
is a command, “123456” is password, the tracker will send back in-
formation “All Alarm Cancel”, and cancel all the shock alarm setting
in the tracker. if the password is not right, the operation is fault, the
tracker will send back information “Wrong Password”.
Note: RESET and FACTORY also can cancel all alarm setting,
about the difference please see above.
13. SOS Emergency
In the normal mode press the SOS button and don’t not release
(Press button over 6 seconds), the GREED LED will flash quickly,
