12
2.
Turn the locking eyelet counterclockwise to reduce the
clamping stroke. Turn the locking eyelet clockwise to increase
the clamping stroke.
3.
Now tighten the locknut.
3.5.2
Work procedure
1.
Throw the locking eyelets in such a way, that they form a right
angle with the container wall.
Caution
Danger of pinching between cover and transport container
Slight injuries to fingers and hands
Wear work gloves Do not insert your fingers or hands between the cover and
the transport container.
2.
Attach the lifting gear to all 4 anchor points on the cover.
(only at XXL box)
Use the guides on the cover. (only at LP1-Box)
approx. 90°
