Pos. 2
Pos. 2
Pos. 1
22
Instruction Manual
GB
batons/dices
+
+
quarters/
eighths
+
+
+
Insert the desired blade insert. The insert must audibly lock into
place. Please ensure that you do not touch the blades during use.
Always fit the blade insert so that the required cutting surface is in
Position 1.
EXCEPTION: Cutting into eighths (see next section).
Cutting into eighths
Click the x-shaped fastener on the back of the cutting stamp for
eighths firmly into the struts on the inside of the cutter top.
Place the blade insert for quarters/ eighths in the cutter base so that
the cutting surface for eighths is in Position 2.
CAUTION!
The cutting stamp must only be used with the blade insert for
quarters/eighths. If another blade insert is being used, the cutting
stamp may NOT be used, or must be removed before use.
Summary of Contents for NicerDicer Plus
Page 80: ......