English
18
Chapter 4: Using the Remote Control
The Remote control allows you to operate TVGo A-11, such as turning your TV on/off, viewing
the TV, and changing the channels and volume. Aim the front of the Remote Control at the
Remote Control Receiver and press the control buttons as you would on the infrared ray
receiver.
4.1 Installing Batteries
Open the back cover of the remote controller and put in two AAA batteries (alkaline battery
recommended).
4.2 Remote controller functions
1.
Power:
Open/Close TVGo A11 program.
2.
Mute:
click to mute, click again to restore.
3.
Video Settings:
click to respectively adjust video
brightness, contrast, hue and saturation (use together
with the right two direction keys).
4.
Snapshot:
snapshot
5.
Teletext:
Show Teletext Image
6.
Pause:
Pause record.
7.
FM:
Change source to FM Radio
8.
Hide Panel:
hide/show control panel.
9.
Video Default:
click to set video brightness, contrast, hue
and saturation to default value.
10.
Volume Up/Down:
click to enlarge/reduce volume.
11.
Channel Up/Down:
click to switch previous/next channel.
12.
REC:
record movie.
13.
Left and Right Arrow:
to adjust video properties, e.g.
brightness, contrast, hue and saturation.
14.
Recall:
return to the channel selected last time.
15.
AV Source:
switch among TV signal, S-VHS and AV
signal.
16.
Full Screen:
click to full-screen display video; click it
again to restore the original size.
