background image

  This machine is not suitable for children under 14 years of age. 

  Use the treadmill only for its intended use as described in this manual. 

  Children, elderly users and pregnant women are advised 

NOT

 to use the treadmill. 

  Assemble  and  operate  the  treadmill  on  a  solid,  level  surface.  Locate  the  treadmill  a  few  feet  from 

walls  or  furniture.  Check  the  unit  before  each  use  and  verify  that  all  fasteners  are  secure.  Always 

maintain the treadmill in good working condition. 

  An error may occur due to unstable power. 

DO NOT

 share a power socket with other high-powered 

items such as computers or air conditioning units. 

  It is suggested to wear suitable sports trainers and sensible gym clothing when using the treadmill. 

  Take care when folding and unfolding the treadmill before and after use. 

 

DO  NOT

  attempt  to  service  the  treadmill  yourself  except  for  the  maintenance  tasks  which  are 

described in this manual. The treadmill does not contain any user-serviceable parts so disassembling 

it yourself will not only void your warranty but could result in serious injury. 

Keep both the machine and power cord away from heated surfaces.

 

  Make sure you are wearing proper exercise clothing and shoes during a workout

—no loose clothing. 

Tie back long hair. Keep all loose towels away from the running surface. The running belt will not stop 

immediately if an object becomes caught in the belt or rollers. 

  If you begin to feel unwell during use, stop immediately and consult your doctor or personal trainer 

before continuing. 

  Take care when adjusting the speed setting and increase or decrease steadily. 

  The safety tether cord clip must be attached at waist level prior to starting a workout. The safety cord 

connects the security clip to the yellow button on the console. If you encounter any type of difficulty 

while using the treadmill, a strong tug on the safety key cord or a quick tap on the red 

ON/OFF

 button 

will stop the running belt. 

  Please make sure the running belt is fastened before using. 

 

DO NOT

 adjust the belt while machine is turned on or being used. 

  Please switch off all functions and disconnect from mains power supply after use. 

 

2. SAFETY NOTICE 

TION

 

3. CAUTION DURING USE 

TION

 

Summary of Contents for KBR-JK8808














Reviews: