71
MANUALE ISTRUZIONI
Rev. 01_05_2018
Serie Clinic 3
INNOVATIVE CLEAN TECHNOLOGY
ETHAFILTER s.r.l.
Via Dell’Artigianato, 16/18
I-36050 Sovizzo (Vicenza) Italia
Tel. + 39 / 0444 376402
Fax +39 / 0444 376415
e-mail: ethafilter@ethafilter.com
CERTIFICATE of CONFORMITY
FILTER ELEMENT
Model: EDT 4869 FF3
These filter elements are manufactured to the highest quality standards to ensure the best performance and reliability.
Materials of construction are as follows:
End Caps
POM / Stainless steel / Alluminum / PETP
Inner and outer cylinder:
stretched perforated stainless steel
First / Final Filtration Layer:
superbonded PES or fiber glass
High Efficiency Filtration layer:
borosilicate glass microfibre depth “sandwich”
(CA-CAS: depth “sandwich” made of borosilicate glassmicrofibreimpregnated by sinter activated carbon )
Drainage Layer (if fitted; not for RD)
polyester needle felt or coloured foam
Potting
two part polyurethane
FILTER ELEMENT PERFORMANCE:
The filter element guarantees following performances based on its filtering grade:
IMPORTANT NOTE:
-
Do not use the element out of the limits declared in the above table.
-
Once differential pressure limits/or usage hours would be achived,filter element should be replaced.
-
Only competent personnel is allowed to install,make maintenance or replace filter elements
-
It’s forbidden to move or to replace any filter element from the filter housing under pressure.
FILTER GRADE
WS
VF25
RD 25
FF5
RD5
FF3
VF3
RD3
MFO
FF1
RD1
SMA
SMFO
RDA
SMAA
CA
CAS
Max particle size
n.a.
25
μ
5
μ
3
μ
1
μ
0,01
μ
0,01
μ
0,01
μ
Max oil content (@20°C)
30 mg/m
3
10
mg/m
3
5
mg/m
3
3
mg/m
3
0,1
mg/m
3
0,01
mg/m
3
0,001
mg/m
3
0,005
mg/m
3
ISO 8573-1 Class
Solid particles
n.a.
4 3 3 2 1 1 1
ISO 8573-1 Class
Max oil content
n.a.
n.a.
4 4 2 1 1 1
Initial
Δ
p
⇒
clean and dry
n.a.
30 mbar
40 mbar
50 mbar
75 mbar
100 mbar
100 mbar
75/150 mbar
Initial
Δ
p
⇒
saturated
(not for RD grade)
70 mbar
50 mbar
75 mbar
100 mbar
150 mbar
300 mbar
300 mbar
n.a.
Δ
p max.
⇒
change of element
n.a.
350 mbar
4-6 month
Max allowable temperature
≤
70°C
120° C (
≤
60 °C with foam drainage layer)
≤
50°C ≤
25°C
grades
WS, VF, FF, MFO, SMFO, SMA, CA, CAS
⇒
from inside to outside
Flow direction
for every
RD
grade
⇒
from outside to inside
INSTRUCTION MANUAL
MAN_CNC3_A001
EN
Summary of Contents for CLINIC 3/24
Page 77: ......
