0.1-0.2 g
Flat
Surface
WARNING: Before you can fill your cartridge and begin using it, you need
to prime the cartridge using the following instructions.
1. Remove the mouth tip from the cartridge.
2. Place your V2 or Mega V2 upright on a flat surface. In recent kits we have
included holes in the removable foam layer (inside the box) to help hold
cartridges upright during filling.
3. Scrape 0.1-0.2 grams of concentrate onto a fill tool or paper clip.
4. Position the fill tool so that the concentrate is directly above the center of
the cartridge.
Priming the V2 Oil Cartridge
7