background image

 

 

SAFE OPERATING REQUIREMENTS:

 

• Never set an amplifier on anything that will tip over or collapse under its weight. 
• Provide a minimum distance of 1 inch (25.4mm) around all sides of the amplifier for sufficient ventilation.  The 
Ventilation should not be impeded by covering the amplifier’s vent openings with items such as newspapers, tablecloths,       
curtains, etc. 
• No naked flame sources, such as lighted candles, should be placed on the 

MAGELLAN

 800

 amplifier. 

• This amplifier should not be exposed to dripping or splashing and no objects filled with liquids, such as vases or drinks,        
should be placed on this product. 
• The 

MAGELLAN

 800

 amplifier should be connected to a mains outlet (power receptacle) with a protective earth 

(ground) connection at all times. 
• The amplifier’s mains plug (power plug) is considered the disconnect device and the connection must remain accessible 
at all times. 
• This amplifier is capable of producing sound pressure levels that may cause hearing loss. 
• There are no user serviceable parts and hazardous operating voltages are present inside this unit.  Always consult a 
qualified repair facility for service. 

 
 
WARNING! 

• The use and operation of this device constitutes an agreement of full release of any and all liability connected with its 
use.  Only persons familiar with the operation of high-powered professional audio equipment should attempt to operate 
this device. 
• In addition, by use of this device, the user agrees to hold 

GENZLER

AMPLIFICATION

 and its designers, sales agents 

and all other affiliates and related parties harmless in the event of any accident, injury, damage, or loss resulting from 
such use. 
• Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product under normal 
operating conditions for a period of 3 years. 

 
 
WARRANTY: 

• 

GENZLER

 AMPLFICATION

 warrants the model 

MAGELLAN

 800

 to be free from defects in materials and 

workmanship for a period of 3 years from the date of purchase, when purchased from an authorized 

GENZLER

™ 

AMPLIFICATION

 dealer. 

• This warranty does not cover normal wear and tear incurred from the normal designed use of the product. 
• This warranty is effective only if a copy of the original sales receipt is presented at the time of warranty service.  
• All warranty service must be performed by a 

GENZLER

™ 

AMPLIFICATION

 authorized service center.  

• Before returning any unit for service, a returned merchandise authorization number (RMA#) must be obtained by 
emailing 

support@genzleramps.com

 . 

• This warranty is valid in the US & Canada only.  For all products sold outside the USA, warranty is handled through our 
international dealer or distributor for each country.  All warranty registration should be completed on our website.            
For complete warranty information visit: 

www.GENZLERAMPLIFICATION.com.

 

 
                      
 
                                                                      

GENZLER

 AMPLIFICATION LLC 

                                                                        BROOKLYN, NY  11215   U.S.A. 

                                                                                   Email: 

info@genzleramps.com

 

 

Form: MG800-OM-REV1 

Summary of Contents for MAGELLAN 800







Reviews: