26
EN
OPERATION - INSTRUMENT KEYPAD
POWER ON/OFF (2)
Power the laser on/off with button
(2).
If the red ON/
OFF LED
(1)
is illuminated the laser is powered on.
First the laser dot is flashing, then the self-levelling
procedure starts automatically; meanwhile the TILT
LED
(8)
is flashing. When the self-levelling procedure is
completed the laser rotates with 600 rpm and the TILT
LED
(8)
is illuminated permanently (= TILT function
activated).
5
7 8
1
2
3
4
9
6
If in normal use the ON/OFF LED
(1)
flashes the battery has to be recharged.
ROTATING SPEED (3)
The instrument standardly rotates with max. speed (= 800 rpm). Press button
(3)
to change to 300 rpm.
ON / OFF REMOTE CONTROL FUNCTION - INSTRUMENT BUTTON ONLY (4)
With this button the remote control function can be disabled in order to avoid that several units on one
construction site disturb each other. If the remote control LED is illuminated it is the remote control
function is ready-to-receive.
LED REMOTE CONTROL (9)
If the LED is illuminated the the remote control function is ready-to-receive.
TILT MODE (7)
After completion of the self-levelling procedure the TILT mode is automatically enabled.
If the level is now disturbed the rotation stops and the TILT LED is flashing.
1. Press the TILT button
(7)
once: The rotation of the laser starts - but the TILT mode is
disabled.
2. Press the TILT button
(7)
twice: The rotation of the laser starts, the self-levelling procedure is
completed and the laser restarts working with enabled TILT mode.
Press button
(7)
to disable the TILT mode after completion of the self-levelling procedure.
