7
Verificarea Preciziei
ACCURACY
CHECK
Set up instrument in rotating mode and take
reading on wall at distance of 10 meters. Mark
laser line on wall. Turn instrument 180° around
its vertical axis and take 2nd reading. Mark
centre point between two readings. Deviation
of both readings from centre point should not
exceed 1,0 mm per 10 metres.
Take two more readings after turning instru-
ment 90° around its vertical axis and proceed
as mentioned above.
Telecomanda
REMOTE
CONTROL
The keys of the remote control are identical
with the keys of the instrument. Exception:
With the „POWER“ key of the remote control
the unit can only be switched off but not star-
ted.
B
A
C
Tastele de control telecomanda sunt identice cu
tastele instrumentul. excep
þ
ie: Cu POWER tasta
de control a telecomenzii Unitatea poate fi doar
oprit, dar nu pornita .
Configura
þ
i instrumentul in modul de rota
þ
ie
þ
i se
citeste pe perete la o distan
þ
ã
de 10 metri. Marcati
Linia laser pe perete. Porni
þ
i instrumentul rotindu-l
circa 180 ° in jurul axei sale verticale
þ
i cititi a dou
ã
valoare. Marcati punct central între dou
ã
citiri.
Abaterea ambelor citiri din punctul de centru nu ar
trebui s
ã
dep
ã
þ
easc
ã
1,0 mm pe 10 de metri.
Lua
þ
i dou
ã
lecturi doar dup
ã
intoarcerea
instrumentului cu 90 ° în jurul axei sale verticale
þ
i setati continuu dup
ã
cum sa men
þ
ionat mai
