14
EN
OPERATION
D
SWITCHABLE LASER LINES
POWER ON
Power on the laser by turning the ON/OFF knob in position ON. The instrument is now ready for use.
An audible and optical (blinking lines) alarm indicates if the instrument was set up outside of the com-
pensator range. Set up the instrument on a more even surface.
To power the instrument off turn the ON/OFF knob back
to the OFF position. The instrument is now powered off.
NOTE:
During transport the ON/OFF knob (compensator lock)
must be set to OFF. Disregard may lead to damages of
the compensator.
Setting up the laser:
· set up the laser on the floor direct
· set up the laser onto the multi-functional mount
· click the laser onto the 20 mm fix-height adapter and align it on the multi-functional mount
· fix it onto a tripod
· fix the magnets of the wallmount onto a magnetic surface (steel plate)
· set up the laser in a hanging position by means of the hole of the wallmount
· connect the laser to a column by means of the fixing strap
