15
EN
ACCESSORIES
Height checking pins
· checking of floor flatness by use
of height-check pins
20 mm fix-height adapter with 1/4“
· for use on the floor direct
· for connection to a tripod with 1/4“
· fix height: 20 mm from the bottom
line to the laser plane
MANUAL FUNCTION
If the instrument is in OFF position press the button MANUAL function to enter into the MANUAL
mode; the ON/OFF LED is illuminated, the MANUAL LED is blinking. Now the instrument can be
used in slope mode, the compensator alarm is off. All lines can now be switched as in standard mode.
Switch off the MANUAL function with the button MANUAL function
USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions Geo4-XR GREEN can be used with an
optional receiver (not included in this kit).
Switch on the desired laser lines and press the button receivng mode at the laser (the LED for the
corresponding lines flashes).The selected laser lines can now be deteced by the receiver
(the visibility of the laser lines is weaker in this mode).
By use of the receiver the working range can be extended up to 60 meters. For more detailed inform-
ation please see the user manual of the receivers.
Press the button receiving mode again to quit this mode.
