disappears. The user can lock a maximum of nine messages.
Note: this feature may have been disabled on your pager. If in doubt,
check with your dealer.
2.4
Deleting/Deleting All Messages
Display the message to be deleted, press “Selection” key, the signs of “PROTECT” and
“DELETE” will appear in turn. When the sign of “DELETE” appears as below:
press “Read/Confirm” key to delete the message. The next message will be shown (if
any). To delete all messages, press “Selection” key whilst in the standby mode, press
“Read/Confirm” until “DELALL” is displayed. Press “Read/Confirm” key for one second,
then all unlocked and read messages will be deleted.
3.
Function Setting
Whilst in the standby mode, press “Selection” key, then all the settable functions will appear
for choice: (Standby Mode)
Ö
Set Alert
Ö
Set Time
Ö
Set Date
Ö
Daily Alarm
Ö
Set Sleep
Ö
Melody
Ö
Delall
Ö
PGR Off (switch pager Off).
Note: “Delall” will only appear when there is a stored message in the pager. The other
functions will only appear if they have been pre-programmed as enabled. If in doubt, consult
your dealer.
3.1
Set Alert
Press “Selection” key until “Set Alert” is displayed: if the pager is in Tone (sound) alert
mode, then Vibrate mode, Tone+Vibrate and Mute mode are available for choice; if the
pager is in Vibrate mode, then Tone mode, Tone+Vibrate and Mute mode will be
available for choice. Press “Read/Confirm” key to select.
Note: the pager may have been pre-programmed as locked in one mode only. Where this is the
case, the “Set Alert” menu will not be displayed. If in doubt, consult your dealer.
3.2
Set Time
Press “Selection” key until “Set Time” is displayed. Press “Read/Confirm” key to show:
The changeable digit is
shown in blinking form.
Press “Read/Confirm” key to change the content. Press “Exit/Backlight” key to confirm
the current setting, and return to the standby mode.
