background image

Caution

The micro SD card is the only usable Micro SD card for this product.

In case of a lost or stolen SD card, please contact your local retail shop to 
purchase a replacement.

If a damaged or a non-authentic SD card is used, the recorded data maybe 
damaged or will not record and/or replay due to difference in quality.

Caution
Do not disassemble or remodel this product as it can cause an electric 
shock.
Any malfunctioning after such action will result in the product being unfit 
for use and void all warranty/service provisions.
Consult the retailer for product maintenance and repairs if necessary.

Only use adaptors with the appropriate specifications. The use of other 
adaptors will defect the product and or cause fire.

All wiring should be carefully implemented so the cable may not be 
damaged.

When installing the device to your vehicle, follow all the procedures and 
make sure the mount is secure. Unclean surfaces will weaken the adhesive 
strength and can damage the product if it drops due to weak adhesion.

This product is not waterproof. Do not allow liquids and impurities to enter 
the product.

Where the product is wired to the power supply of the vehicle directly or if 
the cigar jack is connected to the power supply while the engine is off, 
make sure to disconnect the device to prevent battery drain on your vehicle.

Summary of Contents for VD-1500B







































Reviews: