Geoidsoft Inc. - Mobile GPS Online
3151 Strandherd Drive, P. O. Box 45535, Ottawa, ON K2J 0P9 Canada
https://www.mobilegpsonline.com
Tel.: 613-8230926
Installation Steps
1.
Locate and mount the outdoor (receiving) antenna on the roof of
building horizontally with the best visibility of the sky. Make sure that
the antenna is installed vertical upward.
2.
Fix the outdoor connection cable RG8 along the out wall. Connect one
terminator to outdoor antenna and another terminator to the lightning
protector. The cable length is customizable from 10m to 100m. In
some special environment, you may select PE or PVC plastic pipe to
protect the cable assembly.
3.
Place the GNSS-1000B at a safe place and connect the lightning
protector to the GNSS-1000B signal repeater.
4.
Connect the ground wire of the lightning protector to the ground.
5.
Fix the indoor cable 3DFB along the ceiling of the operation room(s)
and mount the two transmitting antennas on the ceiling or crossbeam
above the center of the testing benches or workplaces.
