27
3.5.1 Live Readings- With Selected Sensor
This menu item will only be enabled if a successful connection has been established with
the remote module. A successful connection is indicated by the icon to the right of the
“Geokon” label as well as, a status of “Connected” at the bottom of the main screen. Both
of the connection indicators are shown inside red ovals in Figure 42 (see Section 2.3 and
3.5.3 for information regarding connecting to the remote module).
Figure 42 - Sensor Selection Screen, Remote Module Connected
Tapping on the “Live Readings” menu item displays the sub-menu shown in Figure 43. Tap on
“With Selected Sensor”. (For information on the “Raw Readings” option, see Section 3.2.)
Figure 43 - Live Readings Menu Selections
