GLOG V2 Quick Guide
13
GLOG V2 Real-Time Clock (RTC) Reset
TIME.TXT:
A text file containing the correct date and time
PREPARATION:
- use a PC text editor to create a text file; name it TIME.TXT
-
type the correct date and time in the first line of the file as follows
YYYY/MM/DD HH:MM:SS
e.g. 2015/05/02 03/10/00
-
save the file with the correct date and time to the SD card
PROCEDURES:
- insert the card with the TIME.TXT file into GLOG V2SD card slot
- power the unit ON and wait about 10 seconds
- power the unit OFF then remove the SD card
- on a PC, delete the TIME.TXT off the SD card (or just change its name to something else)
- The RTC now is reinitialized with the new date and time and should report the correct date and time
NOTE: The SD card containing TIME.TXT may contain other files
