CAUTION
Reflected beams aimed at reflecting surfaces
Potential hazards are not only related to direct beams but also to reflected
beams aimed at reflecting surfaces such as prisms, windows, mirrors,
metallic surfaces, etc.
Precautions:
▶
Do not aim at areas that are essentially reflective, such as a mirror, or
which could emit unwanted reflections.
▶
Do not look through or beside the optical sight at prisms or reflecting
objects when the laser is switched on, in laser pointer or distance
measurement mode. Aiming at prisms is only permitted when looking
through the telescope.
1.6.1
Laser Class 1
The rotating laser built into the product produces a visible laser beam
which emerges from the laser aperture.
The laser product described in this section, is classified as laser class 1 in
accordance with:
General
Safety Directions
22
