☞
If the LED on the remote control is flashing red while sending,
the batteries are low.
1.
Loosen the six screws on the back case of the remote control to
open the battery housing.
2.
Take the back case.
3.
Replace the batteries.
☞
Always use three new batteries size AA (LR6) of the same type.
☞
Do not mix new and old batteries. Mixing old and new batteries
decreases the battery lifetime.
4.
Check
•
the correct position of the back case.
•
that the back case is free from dirt.
5.
Close the housing and tighten the six screws to make sure that
the remote control is waterproof.
3.1.3
Charging the Battery
The instrument has integrated rechargeable batteries.
Charge internal
battery
Product Overview
46
