Zoom90 Series
- 8 -
Installation Guide
© 2015 GeoMax AG, Widnau, Switzerland
3.5
I
NSTALLING
USB
DRIVERS FOR THE
Z
OOM
90.
The Zoom90 is equipped with a USB connector behind the side-cover. This USB
connection can be used to connect the Zoom90 to a PC and have it detected as a mass
storage device. Having this option is usefull for dragging and dropping files between your
Zoom90 and the Dekstop PC. Also these USB drivers will be needed if you want to make
an ActiveSync or Window Mobile Device Center connection to install 3
rd
party software
onto the unit.
To install the drivers, do the following:
1)
With your Internet browser, navigate to the GeoMax download page.
2)
Download the Zoom90 USB drivers.
3)
Make sure the Zoom90 is not connected to the PC
4)
Run the SetupZoom90_USB_xx.EXE
5)
Follow the instructions on the screen.
6)
When ready, press FINISH.
7)
Connect the Zoom90 to the PC with a USB cable.
8)
Power ON the Zoom90
Your PC will then try to recognize the Zoom90 and associate the appropriate drivers with
it.
www.rusgeocom.ru
