8
9
Note:
You can turn off SEAR by pressing the SEAR button. The skillet will
automatically revert to the preset temperature.
6. If you have more food to sear, press the SEAR button again and follow steps
2 through 5.
7. When finished searing, you can add more food and continue cooking at your
regular temperature or press the ON/OFF button and unplug the appliance if you
are finished using the skillet.
Care and Cleaning
This appliance contains no user-serviceable parts. Refer service to qualified service
personnel.
CLEANING
1. Unplug the cord and let skillet cool completely.
2. Make sure the digital control probe is removed.
3. To wash the cooking pan, fill with warm, sudsy water; scrub as needed, rinse,
then dry thoroughly. The lid can be washed in the dishwasher, top-rack only.
Important: Do not immerse the cooking pan in water. For hard stains, use a
sponge or nylon scouring pad with liquid detergent.
Important: Do not use any abrasive cleaners or metal pads as they can damage
the nonstick coating.
4. Rinse and dry all parts thoroughly.
5. Wipe the cooking pan exterior base with a damp cloth and dry thoroughly.
STORAGE
Store the skillet in a dry place and wind electric cord into a coil securing it with a
twist tie.
TROUBLEShOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Finish on cooking pan
is cut or scratched.
Metal utensils have
been used.
Always use silicone, heatproof
plastic or wood utensils to
avoid scratching nonstick
surface. Never use metal
spoons, spatulas, tongs, forks
or knives.
Skillet smokes or has an
odd odor on the
first use.
This is normal on the
first use.
Due to manufacturing
processes, during initial use
of this appliance, some slight
smoke and/or odor may be
detected.
Skillet does not turn on. Skillet is not plugged
in or digital control
probe is not inserted
fully into probe
socket.
Check to be sure appliance is
plugged into working outlet
and the control probe is fitted
fully into the probe socket.
Temperature does not
register on the probe.
Skillet is not plugged
in or digital control
probe is not inserted
fully into probe
socket.
Check to be sure appliance is
plugged into working outlet
and the control probe is fitted
fully into the probe socket.
