6
ELECTRIC CONVERSION
6 Electric Conversion
Time
8 hours 0 minutes
Parts
•
Castle Creations ESC
•
Castle Creations 2028 motor
•
Castle Creations motor fan
•
Castle Creations Baja (CCB) conversion hardware or Rovan Baja (RB) conversion hardware
•
If using RB kit:
–
2 M5
×
16mm button head screws
–
2 M3
×
10mm socket head screws
–
1” wide Heavy Duty Mounting Tape
–
Battery foam from “Laser Cutting” section
Notes
•
If your conversion kit does not include instructions, refer to the Chassis-electric-conversion-
instructions-CC Baja.pdf file in the
folder. The item numbers in this section cor-
respond to those in the instructions’ parts list.
•
A link to videos is provided in “Useful Links” or they can be found in the Baja Electric Conversion Videos
in the
folder. Modifications to video instructions are listed below.
•
Remember to
always
use thread low-temperature lock (Z186 red threadlock or blue Loctite
243 instead of the greenish-blue colored thread lock Z159) for metal-on-metal connections.
•
Video #7 can be skipped since that covers what should be done in the “Capacitor Precharge
Circuit” section.
Instructions
a. Remove the wheels, rear skid plate, engine plate, side covers, both side rail guards, and the roll
cage as shown in video #2.
10
Summary of Contents for AutoRally
