Geosense Wi-SOS 100 Instruction Manual Download

Page: 4 / 22

V1.0

1.0 INTRODUCTION

This manual is intended for all users of

Geosense

Wi-SOS 100

supplied by Geosense

and provides information on their installation, operation and maintenance

1.1 General Description

The

Geosense

Wi-SOS 100

is a direct to web (D2W) wireless data transmitting node. It

is housed in a waterproof (IP68) case and can be used with sensors that output 4-20mA

or single ended voltage. The data it transmits is sent to a central website via the cloud.

The nodes can be read wirelessly from any PC/laptop as well as smartphones and tablets

via an internet web browser.

Designed to be used with :-

•

Tilt meters

•

Tilt Beams

•

Piezometers

•

Displacement transducers

•

Total Pressure cells

Particular features of the

Geosense

Wi-SOS 100

are:-

•

CE compliant

•

IP68 Waterproof casing

•

Cloud data storage

•

Remote access

•

Secure website

•

Built in SIM card

•

Long battery life

•

Simple to set up

It is VITAL that personnel responsible for the

installation and use of the Geosense

Wi-SOS 100 ,

READS and UNDERSTANDS this manual, prior to

working with the equipment.

Summary of Contents for Wi-SOS 100























Search results

Summary of Contents for Wi-SOS 100

Reviews:

Related manuals for Wi-SOS 100

Brands by name

Popular brands

Geosense Wi-SOS 100, Instruction Manual

Search results

Summary of Contents for Wi-SOS 100

Reviews:

Related manuals for Wi-SOS 100

Brands by name

Popular brands