5
V1.0
1.2 Theory of Operation
The
Geosense® Wi-SOS 100
is a revolutionary low cost wireless monitoring solution.
With no extra power supply or data cables required you can connect the device to any
compatible 4-20mA or single ended voltage sensor and data is automatically transmitted
to our sensor platform for reporting and logging. Each
Geosense
®
Wi-SOS 100
can
connect to 1-2 single output sensors or a single biaxial tilt sensor.
The electronics within the
Geosense
®
Wi-SOS 100
are completely encased in a
waterproof (IP68) casing, therefore eliminating the need for additional casings. The small,
light casing allows the
Geosense
®
Wi-SOS 100
to be installed in small spaces.
The
Geosense
®
Wi-SOS 100
has an internal batter that is estimated to last 5+ years at
15 minute reading intervals, but may change depending on reading frequency. This
eliminates the need for external battery packs and thus placing the
Geosense
®
Wi-SOS
100
is
a lot more flexible.
Geosense
®
Wi-SOS 100
comes with a fully integrated GSM SIM card. The SIM card
comes fully set up and is tailored to the country in which they are being used in. This
gives the customer absolute piece of mind, in the knowledge that the
Geosense
®
Wi-
SOS 100
comes ready to use.
Geosense
®
Wi-SOS 100
is accessed through a cloud-powered sensor platform. Each
customer will get an individual login, which can be used to view all of the
Geosense
®
Wi-SOS 100’s
at each individual site. The data can be viewed in simple graphs and
visualisations for ease of reading. This allows customers to build up a network of
Geosense
®
Wi-SOS 100’s
and monitor each node at each site remotely.
The data can also be downloaded in CSV format for use in excel.
