Basic Operations
17
Checking the Remaining Power
Tap the
Start
>
Setting
s>
Control
Panel
>
Power
properties item to check the
remaining power. If the remaining power
shown in
Main battery
area is 100%, but on
the task bar, the battery icon is along with a
lightning bolt signal, then it means the
battery is not yet fully charged. If the
charging is stopped at this time, the
remaining power (shown in this dialog box)
may be reduced to 85%.
Only when the power part shown in
Main
battery
area is as
Good
and 100%, the battery
is really fully charged.
Note:
This is because the charging voltage detected by WinCE is a little higher than the real
battery voltage. Constant pressure charging is important for full charging. Please complete
the whole charging process to ensure the working time.
Power Saving Mode
In default condition, screen backlighting will be turned off automatically if no operation
(press keys or tap touch screen) has been carried out for 1 minute. The system will enter the
standby mode if no operation has been carried out for 30 minutes, and be power off if no
operation has been carried out for 2 hours.
