GeoPro K2 Series Hardware Operation Instructions
20
Serial Port Settings
Double tap the
Communication Mode Settings
icon
in the
Control Panel
, then the
Communication Mode Settings
dialog box appears, as shown below:
Users can define the function of COM1 as Radio (PC) or Bluetooth in this dialog box.
Bluetooth Settings
Tap the
Bluetooth Settings
tag in the
Communication Mode Settings
dialog box, the
Bluetooth Settings
interface appears, as shown below left. To use Bluetooth , you need to
tap the
Power On
button in the
Bluetooth Power
area, to turn on the power of Bluetooth .
Thus the
Turn On
buttons of Bluetooth
is
activated.
Tap the
Turn On
button in the
Bluetooth
area you can enable the Bluetooth. When the
Bluetooth is enabled, you can tap the
Turn Off
button in the
Bluetooth
area to disable it.