GeoPro K2 Series Hardware Operation Instructions
28
Installing, Uninstalling or Updating GeoPac Software
For details, please refer to the
GeoPac User’s Manual
.
Upgrading the Firmware
Method 1:
1.
Connect K2 series to PC with data cable. For details, please refer to chapter:
Connecting to PC
.
2.
After Microsoft ActiveSync is connected to handheld as below:
3.
Click the
Explore
button of Microsoft ActiveSync to open K2 series resource browser.
Copy the latest version firmware file to “Storage Card”.
4.
In power off status, press “ESC” and power button at the same time, the interface of
“Updating the firmware, please wait…” will be shown as below. Then the handheld will be
upgraded to the new version of firmware in Micro SD card.
Method 2: