10
Chapter 4: system maintenance
Maintenance Procedures
Disconnect power source when not in use.
Unit must be returned to Geotech for any service. In order to ensure a long service life,
keep the Geocontrol PRO clean. Often a soft, damp cloth can be used to remove dust
and dirt from the exterior surfaces of the Geocontrol Pro. In extreme cases, or to remove
aged caked on dirt and dust, a mild soap and water solution can be applied to a soft
cloth and used to clean the exterior surfaces of the Geocontrol Pro. Do not soak or
directly spray liquids on the Geocontrol PRO.
Equipment can be repaired by factory trained repair technicians only. Improper repair of
equipment may result in degradation of performance and/or service life. Disassembly
exposes potentially dangerous moving components that could injure someone who is not
properly trained to repair this equipment.