Accessing the Camera
98
2
2.1.2 Configuring the IP Address
By default, when the device is connected to LAN without a DHCP server, it is assigned with a
static IP address of
192.168.0.10
. Follow the steps below to assign a new IP address to
avoid IP conflict with other GeoVision devices.
1.
Open your Web browser and type the default IP address
192.168.0.10
.
2.
Type your username and password. Click
Login
.
3.
Click
Setup
, select
Common
in the left menu and select
Network
.
Figure 2-2
4.
Select
Static IP
from the
Obtain IP Address
drop-down list.
5.
Enter the IP address, subnet mask, and default gateway address. Make sure that the IP
address of the camera is unique in the network.
6.
Click
Save
.
Note:
When you are changing the network segment through the Web interface or GV-IP
Device Utility, it is required that you change the default gateway, too, for the change to take
effect.
Summary of Contents for CV-ADR2702
Page 161: ...148 Figure 3 36 ...
