130
3.3.3 Audio
Note this function is only applicable to audio-supporting models.
You can configure the audio settings of the camera.
Figure 3-17
◼
Audio Input
: Select
On
to enable audio input.
◼
Input Gain
: Set the audio signal amplification for sampling. The greater the gain, the
greater amplification.
◼
Audio Compression:
Select an audio codec.
◼
Noise Suppression
: Select
On
to reduce the noise of the audio.
◼
Channel 1
/
2
: Click
Enable
to enable audio in through the cam
era’s built-in microphone
and/or Audio In wire(s) depending on the model.
◼
Audio Output:
Select the source of audio output.
◼
Output Gain:
Set the volume for audio output. The greater the gain, the higher the
volume.
◼
Alarm Audio File:
For GV-TBL8804 only, select
Browse
to locate a custom PCM audio
file (max. 100KB), and click
Import
.
Note:
For GV-TDR2700 / 4700, connection(s) to any software/application must be
reestablished when its audio input channel has been alternated for the change to take effect.
Summary of Contents for CV-ADR2702
Page 161: ...148 Figure 3 36 ...
