150
For other models NOT equipped with AI functions
Figure 3-38
1. Based on your installation environment, select the
Detection Scene
between outdoor
and indoor (see
Detection Parameters
in
3.6.2 Advanced Settings
). By default,
Outdoor
is selected.
2. Once enabled, select Rule Settings > click
to add a detection line. Repeat to add
another detection line.
3. Drag the ends of the detection line to the intended position to mark the detection
boundary.
4. Select the
Trigger Direction
, which will define the direction to trigger an alarm. For
example, if you choose
A -> B
, people moving from direction A to B will trigger an alarm.
5. Move the slider to adjust the detection
Sensitivity
.
6. Set up
Trigger Actions:
Figure 3-39
A. Select
Upload to FTP
/
Send E-mail
/
Upload Image (Original)
under
Trigger
Actions
to automatically upload snapshots to the specified FTP server and/or send
snapshots to the specified e-mail address upon the video analytic events.
B. Select
A -> 1
/
Alarm Sound
to trigger an output device upon cross line detection.
Depending on your model, select
A -> 1
or
Alarm Sound
to trigger an output device
upon people / vehicle / non-motor vehicle detection.
C. Optionally click
next to
Alarm Sound
to set the desired
Day, Start Time, End
Time, Alarm Audio
, and
Number of Repeat Times
. You can set up to four periods
for each time, and the time periods cannot overlap.
Summary of Contents for CV-ADR2702
Page 161: ...148 Figure 3 36 ...